A slim one piece design that comes in straight vertical or 15 degree vertical wall mount.
Cable port hole allowing Cat5 cable to be plugged into control unit and then into wall cavity. Able to be wall mounted on gyprock/drywall/plaster with two drywall anchors (as shown), or can be mounted on block/brick wall with brick screw anchors.
| Compatibility: | Cisco Touch 10 |
| PIDVID: | CS-TOUCH10 V02 or V03 |
| PN: | 74-115968-02 B0 (V02) |
NOTE: You are purchasing digital .stl 3d file/s.
Not finished fabricated mounts.
Comprises of 2 parts that clamp together around control unit. When printed the clamp is a firm fit, but can be strengthened with a 50mm M4 screw.
Cable port hole allowing Cat5 cable to be plugged into control unit and then into wall cavity or trunking down wall. Able to be wall mounted on gyprock/drywall/plaster with two drywall anchors (as shown), or can be mounted on block/brick wall with brick screw anchors.
| Compatibility: | Cisco Touch 10 |
| PIDVID: | CTS-CTRL-DV10 V03 |
| PN: | 74-100411-04 A0 |
| Note: | Not compatible with PIDVID: CS-TOUCH10 V02 or V03 |
NOTE: You are purchasing digital .stl 3d file/s.
Not finished fabricated mounts.
Licence
Agreeing to purchase you are bound by the following. Files provided are sold as is, Brightcode does not take responsibility for how the files are used.
As the purchaser you may print, modify, or display this model for all commercial or non-commercial purposes. As the purchaser you may not distribute, redistribute or resell or any form of, but not limited to,
licencing or sub-licencing of the files provided. Intellectual property in the product shall vest with Brightcode.
We kindly ask you support us so we can create further great products.
